This includes a bungee and rivets/Chicago screws that can be used for replacing a broken bungee for our e-collar straps.
 
For bungee replacement w/ rivets: a pair of wire cutters and hammer is also necessary and is not included
 
How to replace your bungee:
1. Cut old rivets on either side of the bungee with wire cutters. This can be done by wiggling between the 2 layers of biothane.
2. Replace bungee.
3. Snap new rivets together (3 will be included - 2 for replacement, 1 extra) on either side of the new bungee and lightly set them with a hammer.
 

For bungee replacement w/ adding Chicago screws: a pair of wire cutters, a 5mm leather punch, a hammer, and a flat head screw driver are necessary and not included
 
How to replace bungee and install Chicago screws:
1. Cut old rivets on either side of the bungee with wire cutters. This can be done by wiggling between the 2 layers of biothane.
2. Punch over all 4 existing holes visible to enlarge to be approximately 5mm in order for the post of the Chicago screw to fit through (the larger one much fit through both layers)
3. Replace bungee and install Chicago screws through new hole with screw driver
4. Tighten as much of possible and check for loosing regularly
 

For bungee replacement w/ Chicago screws already there: all you need is a flat head screwdriver
 
How to replace bungee:
1. Unscrew Chicago screws with screwdriver
2. Replace bungee
3. Screw Chicago screws back together
4. Check regularly for loosening
 
*If you are not comfortable doing this yourself, you can mail your collar to use and we can replace the bungee for you. If you would prefer this option, please message us and DO NOT USE THIS LISTING. A custom listing will be sent to you that will include shipping of the collar.
 
**Integrity of these bungees is not guaranteed for any purpose other than the purpose specified with out e-collar straps.